Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Strathroy-Caradoc
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Strathroy-Caradoc

Change or rekey · Strathroy-Caradoc

Lock Replacement & Upgrade in Strathroy-Caradoc

Three teenagers, a dog walker, a cleaner and one house key that keeps going missing.

Call (226) 777-9553

In plain words

A keypad or smart lock is a lock replacement with a few extra steps, and it suits households where keys circulate widely. The locksmith fits the new deadbolt to the existing bore, checks that the bolt throws freely so the motor is never straining against a misaligned strike, sets up user codes and any phone pairing, and shows you the mechanical override and the battery warning. Because these locks still rely on a bolt and a strike, the same attention goes into the frame as for any deadbolt. You gain convenience without giving up the mechanical basics that make a door hard to force.

Sound familiar?

Every morning the front door key needs the same little dance: push in, lift, wiggle, turn. It has been getting worse for a year, and this week it took three tries in the cold before the deadbolt finally gave.

How the visit goes

Lock Replacement & Upgrade

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench. — Strathroy-Caradoc
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel. — Strathroy-Caradoc
  1. The key plan for the whole house

    A lock is only half of a system; the other half is who holds which key. The locksmith asks how many exterior doors there are, which ones should open with the same key, whether a garage man-door or a shed should join them, and who in the household needs a key of their own. If keys have been lent out over the years, the plan can retire all of them at once. Where copying keys without permission is a worry, a restricted keyway can be offered. Settling this before the hardware is chosen means the new locks arrive ready to be pinned alike rather than fixed up afterwards.

  2. Fitting the latch or bolt to the door

    Most modern latches and bolts adjust between the two common backsets, so the unit is set to the measured figure and slid into the edge bore. A spring latch goes in with its bevel facing the strike, while a deadbolt is oriented the way its markings or instructions call for, not by that bevel rule. The faceplate should sit flush in its mortise; where the old cut-out differs in shape or size, the mortise is trimmed with a sharp chisel, or a round drive-in collar is used where the door was prepared that way. The bolt is checked to travel freely before anything else goes on, since a bolt that binds in the door will bind under the key too.

  3. A record of what went on the door

    You are told plainly what was fitted: the maker and model, the grade, the function and finish of each lock, whether the strike was reinforced, and how the doors are keyed. The instruction sheets and packaging stay with you, since they carry the model numbers needed for a matching lever or a spare cylinder later. The old hardware is handed over or taken away as you prefer; a sound old cylinder can be worth keeping as a spare. For a rental, this account doubles as the note a landlord or property manager will want about the new keys.

Lock Replacement & Upgrade

In the van

  • Cylinders, plug follower and pinning kit

  • 75 millimetre strike and hinge screws

  • Boring jig and hole saws

  • Key blanks and key cutter

  • Reinforced strike plate and strike box

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV. — Strathroy-Caradoc

Lock Replacement & Upgrade

What affects the quote

  1. Authorization needed from a property manager or landlord

    A rental or condominium unit sometimes needs sign-off from a property manager or landlord before a lock is changed, and new keys may need to reach more than one party afterward. Confirming who is authorized and who receives keys is worked out before the new hardware goes in.

  2. Strike reinforcement and jamb repair

    A reinforced strike with long screws is a modest addition; repairing a jamb split from a forced entry, or fitting a strike box into a frame that has never had one, adds labour and materials.

  3. Number of doors

    One back door is a small visit; the front, back, side, garage man-door and patio slider together are a longer one, though several doors done at once share the travel and setup.

What to have ready

  • Can you photograph each lock from outside, inside and along the door edge?
  • Has the door been forced or damaged, or does it need a push to lock?
  • Do you want every exterior door to open with one key?
Call (226) 777-9553

Lock Replacement & Upgrade: questions

Questions
Can the same visit replace locks on more than one door, or does each door need its own appointment?

One visit usually covers every door on the job. The locksmith brings a range of cylinders and strikes, measures each door's backset and bore, and works through the list in order, front entrance first if a key change matters most there. Having a rough list ready, which doors, and whether they should end up on one key or several, lets the locksmith plan hardware before arriving rather than working it out door by door on site.

Is it possible to upgrade just the exterior locks now and handle interior doors later?

Yes, and it is a common way to spread the work out. Exterior doors carry the security load, so starting there with a graded deadbolt and a reinforced strike covers the part that matters most first. Interior locks, passage sets, privacy locks on bathrooms and bedrooms, can be scheduled for a later visit without affecting anything already done, and the locksmith can note what was fitted so the second visit matches it.

Can you match the new lock to my other door hardware?

Yes. Manufacturers make deadbolts, handlesets, knobs and levers in matching finishes and styles, so a replacement deadbolt can sit above your existing handle without looking like an afterthought. Bring or photograph the hardware you want to match, including the interior side, and note whether it is a warm brass, a satin nickel, an oil-rubbed bronze or a matte black. Where an exact match is not made, the locksmith suggests the closest family.

Related services

Lock Replacement & Upgrade near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7