Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Person touching the sliding metal bolt on a wooden garden gate. — Gate & Building Entry Locks, Strathroy-Caradoc
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Strathroy-Caradoc

Change or rekey · Strathroy-Caradoc

Gate & Building Entry Locks

The driveway gate drags a groove into the gravel every time it swings, and the latch stopped catching weeks ago.

Call (226) 777-9553

In plain words

A property that grew its gates one at a time, a shed lock here, a side gate there, tends to end up with a drawer full of keys that only sort of match. This service takes stock of every gate and padlock on the property and works out which ones can reasonably be brought onto a single key, replacing or recombining cylinders as needed. The owner leaves with fewer keys, a clear note of what opens what, and a plan for adding any new gate onto the same system later.

Sound familiar?

The driveway gate drags a groove into the gravel every time it swings, and the latch stopped catching weeks ago. Now it sits propped shut with a brick, waiting for anyone to walk through and forget to prop it back.

How the visit goes

Gate & Building Entry Locks

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench.
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel.
  1. Reading a frost-heaved or settled post

    Ground movement shows up as a lock problem long before anyone thinks to blame the post. The locksmith checks whether the gate post has lifted, tilted or settled relative to the latch post it is supposed to line up with, and by how much, since a small seasonal shift is different from a post that has genuinely moved for good. This distinction decides whether the fix is resetting the strike position for now or addressing the post itself, and it keeps the same misalignment from returning with the next frost.

  2. Repairing damage from an earlier attempt or a break-in

    Where the gate or door shows signs of prying, cutting or a spun cylinder, the damaged hardware is removed and assessed on its own before anything is rebuilt: a bent strike is straightened or replaced, a compromised cylinder is swapped rather than trusted, and a cut hasp or shackle is replaced with a heavier one if the original was clearly overmatched. The surrounding wood or metal gets checked too, since forced entry often stresses the frame as much as the lock. The finished gate or door is tested to confirm it closes, latches and locks exactly as it should.

  3. An electronic entry tested as one system

    Where the entry includes a buzzer, keypad or electric strike, you see it worked before the locksmith leaves: the intercom releasing the door on a buzz, the keypad accepting a code, and, where the installed lock includes one, the mechanical override key turning cleanly as a backup. Batteries or settings that were touched during the visit are confirmed, and, if a backup key exists, you are shown where it lives so it is not lost track of. An entry with both a working backup key and working electronics now has two independent ways to open it, worth keeping in mind the day the power or the app misbehaves.

Gate & Building Entry Locks

In the van

  • Hinges, pivots and shims

  • Voltage tester for electric strikes

  • Strike plates and keepers

  • Plug follower and repinning kit

  • Gate locks and latches

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV.

Gate & Building Entry Locks

What affects the quote

  1. Materials the gate or frame is built from

    Wood, wrought iron, aluminum and vinyl gates each take fasteners and mounting approaches suited to that material, and matching the lock and closer correctly to the gate's construction is part of what the quote covers.

  2. How many current key holders need new keys

    Keys cut on site are counted individually into the quote. A single household needs far fewer than a multi-unit building entry where every current resident is being issued a fresh key at once.

  3. Condition of the closer, hinges and post

    Simple adjustment of an existing closer is a smaller job than replacing a worn closer, correcting sagging hinges, or resetting a post that has shifted with the ground; the quote follows whichever combination the assessment finds.

What to have ready

  • Is this a single household gate or a shared building entry?
  • Has anyone moved out or left the building recently?
  • Do you manage this property, or should someone else be involved in the decision?
Call (226) 777-9553

Gate & Building Entry Locks: questions

Questions
Can several padlocks around a property be keyed alike?

Yes, provided the padlocks themselves are a type built to be rekeyed or matched, which is a feature of the specific model rather than something price or quality decides. The locksmith either rekeys the existing padlocks to a shared combination or replaces any that cannot be rekeyed with new ones cut to match. The result is one key working the front gate, the side gate and the shed, instead of a separate key for each, though a utility gate can be left on its own key.

Someone tried to force our gate open. What happens now?

The locksmith first looks over the damage without disturbing it, noting pry marks, a bent strike or a cylinder that has been scored or spun, since that record is useful to have regardless of what else follows. Any hardware that was compromised is replaced rather than trusted, and a weak point the attempt exposed, such as an undersized hasp or a strike with too little bite, is addressed at the same time so the same approach would not work a second time.

A tenant moved out of our building. Do we need to rekey the shared entry?

It is worth doing, since a move-out is exactly the situation a rekey is meant to cover: a former tenant's key still operates the same lock everyone currently living there relies on. Rekeying resets the cylinder to a fresh combination and issues new keys to current residents, without requiring a whole new lock in most cases. Bringing any other gates or doors that share that key along at the same time keeps the whole property on one current combination.

Related services

Gate & Building Entry Locks near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7