Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Detached mortise lock body with a projecting hook-shaped bolt beside a threaded cylinder. — Commercial-Grade Lock Replacement, Strathroy-Caradoc
Three rectangular door-handle sets with keyholes in black, silver-colored and gold-colored finishes standing on a countertop. — Commercial Rekeying, Strathroy-Caradoc

Commercial · Strathroy-Caradoc

Commercial-Grade Lock Replacement

Overnight someone forced the back door, and the cylinder face is scarred, the metal around the strike has pulled loose from the frame, and the latch no longer sits flush.

Call (226) 777-9553

In plain words

Where a home lockout is mostly about getting one door open again, a commercial lock replacement is mostly a decision about a system: how this one door's hardware fits into every other lock the business already manages. The locksmith examines the existing keying, whether cylinders are standard, interchangeable-core or restricted, and whether other doors should be keyed the same way as this one. New hardware is chosen to match the door's fire rating and occupant load where those apply, installed without altering the door's existing prep, and finished with keys cut, tested and recorded in the business's own key-control log.

Sound familiar?

Head office wants every branch keyed alike under one system, and half the locations are still running whatever lockset the original contractor happened to install years ago.

How the visit goes

Commercial-Grade Lock Replacement

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench.
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel.
  1. Weighing what the new hardware needs to do long term

    The last part of the assessment looks past today's problem to how the business expects to manage this door going forward: does staff turnover happen often enough that an interchangeable core, which lets a key holder change the combination without pulling the whole cylinder, would pay for itself in convenience? Does the business want a restricted keyway so blanks cannot be cut at an ordinary hardware counter? These questions shape the specific hardware ordered as much as the door's physical construction does.

  2. Connecting any electrified or access-control hardware

    Where the opening already carries an electric strike, a maglock, a door position switch or a card-reader tie-in, that wiring is reconnected to the new mechanical hardware and tested together rather than assumed to still line up. Voltage, fail-safe or fail-secure operation, and monitoring contacts are confirmed against what the access-control or alarm system expects, since electrified hardware that is almost, but not quite, matched to the mechanical lock is a common source of a door that buzzes open but still needs force.

  3. A door rated for the job it does

    The business is left with hardware sized to how the door is actually used: a mortise lock body or heavy cylindrical lockset that can take the traffic of a busy entrance, or a narrow-stile lock built for the aluminum frame it is mounted in rather than adapted to it. Staff can be shown how the new hardware feels different from the old one, whether that is a firmer latch, a smoother deadbolt throw, or a different key profile, so nobody is caught off guard by hardware that behaves differently from what they are used to.

Commercial-Grade Lock Replacement

In the van

  • Hookbolt and deadlatch hardware

  • Mortise prep and installation tools

  • Interchangeable-core cylinder

  • Listed panic or exit hardware

  • Heavy-duty cylindrical lockset

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV.

Commercial-Grade Lock Replacement

What affects the quote

  1. Number of doors involved

    One entrance is the simplest case. Bringing several doors, or several branch locations, onto matching hardware or one key system in the same engagement is priced across the whole set rather than door by door in isolation.

  2. Condition of the existing door and frame

    A door and frame in good condition accept new hardware into the existing prep with little extra work. Damage from a break-in, a cracked frame or a previously mis-cut mortise pocket adds repair time the quote accounts for separately.

  3. Grade and duty rating of the lock

    Hardware built for higher cycle counts and rougher daily handling costs more than a lighter-duty equivalent, and the right grade for a busy delivery door is not the same as for a quiet interior office.

What to have ready

  • Do other doors on the property share a key with this one?
  • Is the door part of a fire separation or a marked exit route?
  • Is there an electric strike, maglock or card reader already on this door?
Call (226) 777-9553

Commercial-Grade Lock Replacement: questions

Questions
Can you replace just the cylinder instead of the whole lock body?

Often, yes, particularly with an interchangeable-core system where the core is designed to be swapped without removing the lock body from the door. Where the lock body itself is worn, damaged or of a grade that no longer suits the door's traffic, replacing the cylinder alone would leave the underlying problem in place, so the locksmith says which option actually fits the situation found.

What is the difference between a mortise lock and a cylindrical lockset?

A mortise lock has its whole mechanism, latch, deadbolt and sometimes a separate handle function, built into one case that sits inside a pocket cut into the door's edge. A cylindrical lockset is a bored-in unit, simpler to service, common on standard commercial and residential doors alike. Which one your door takes depends on how it was originally prepped, not on preference alone.

Do you handle interchangeable-core (IC) cylinders?

Yes. An interchangeable-core cylinder lets an authorized key holder pull the core and swap in a new one when a key needs retiring, without removing the whole lock from the door. Businesses with regular staff turnover often move to this system because it turns a rekey into a short in-house task rather than a full service call every time.

Related services

Commercial-Grade Lock Replacement near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7