Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Strathroy-Caradoc
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Strathroy-Caradoc

Change or rekey · Strathroy-Caradoc

Lock Replacement & Upgrade

Three teenagers, a dog walker, a cleaner and one house key that keeps going missing.

Call (226) 777-9553

In plain words

Not every complaint about a lock ends in a new lock, and a good visit says so. A cylinder that turns stiffly may only need cleaning and fresh pins; a lost key calls for rekeying, which keeps the hardware and changes the key; a loose lever often wants a tightened spindle. Replacement earns its place when the mechanism is worn through, the housing is damaged, the grade was never adequate for the entrance, or you want a different function, finish or a keypad. The locksmith lays the three routes side by side so the choice rests on what the door needs rather than on what is in the van.

Sound familiar?

The century home's original mortise lock takes a key the size of a spoon, sticks in humid weather and has worn its strike to a groove. You want a lock that works every day without giving up the old door.

How the visit goes

Lock Replacement & Upgrade

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench.
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel.
  1. The rest of the openings

    One failing lock is often the loudest of several, so the locksmith takes a short tour. The back door, the garage man-door, a basement walkout, a sliding patio door and a storm door all count, and so does the door from the garage into the house, which is often the lightest lock on the property. Each is noted for grade, condition and whether it has a deadbolt at all. You are not obliged to do them all at once; the value of the tour is a clear list ranked by what matters most, so the first replacement goes where it makes the largest difference.

  2. Taking the old hardware off without harm

    Removal is done with the same care as fitting. Interior trim screws come out first, then the interior rose or thumb-turn, and the exterior housing lifts away with its tailpiece. The latch or bolt slides out of the edge bore once its two faceplate screws are released, and the old strike comes off the jamb. Painted-over screws are scored free rather than forced, seized screws are eased with a hand driver of the right size, and a stripped head is drilled out only as a last step. The bore and edge mortise are then cleaned of paint build-up and debris so the new parts seat properly.

  3. The rental paperwork, quietly sorted

    If the door belongs to a rental unit, the visit finishes with the keys in the right hands. When a landlord orders the change, giving the tenant a full set of new keys is standard practice. When a tenant orders it with the landlord's consent, a key for the landlord is cut alongside the household's and the consent is noted. The locksmith can leave a short written record of the hardware fitted and the keys issued for the property file, so both sides know what is on the door and nobody is surprised at the next inspection or move-out.

Lock Replacement & Upgrade

In the van

  • Cylinders, plug follower and pinning kit

  • 75 millimetre strike and hinge screws

  • Boring jig and hole saws

  • Key blanks and key cutter

  • Reinforced strike plate and strike box

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV.

Lock Replacement & Upgrade

What affects the quote

  1. Finish and style

    Standard satin nickel or brass is one line; specialty finishes, matched suites across several doors and designer handlesets are others. The finish you choose for exposure and looks is priced as the maker prices it.

  2. Special-order hardware

    Most standard locks come from the van. A specific style, an unusual finish or a restricted system may need ordering, which affects scheduling and is noted in the quote rather than discovered on the day.

  3. Patio and French door hardware

    Sliding door mortise locks, foot bolts and flush bolts for an inactive French door leaf are specialty items sized to the door, and they are quoted as their own line beside the entrance work.

What to have ready

  • Is there glass in or beside the door?
  • How many keys does the household need, and should copying be restricted?
  • Is the problem wear, damage, looks, a change of function or too many keys?
Call (226) 777-9553

Lock Replacement & Upgrade: questions

Questions
Can the same visit replace locks on more than one door, or does each door need its own appointment?

One visit usually covers every door on the job. The locksmith brings a range of cylinders and strikes, measures each door's backset and bore, and works through the list in order, front entrance first if a key change matters most there. Having a rough list ready, which doors, and whether they should end up on one key or several, lets the locksmith plan hardware before arriving rather than working it out door by door on site.

Is it possible to upgrade just the exterior locks now and handle interior doors later?

Yes, and it is a common way to spread the work out. Exterior doors carry the security load, so starting there with a graded deadbolt and a reinforced strike covers the part that matters most first. Interior locks, passage sets, privacy locks on bathrooms and bedrooms, can be scheduled for a later visit without affecting anything already done, and the locksmith can note what was fitted so the second visit matches it.

Can you match the new lock to my other door hardware?

Yes. Manufacturers make deadbolts, handlesets, knobs and levers in matching finishes and styles, so a replacement deadbolt can sit above your existing handle without looking like an afterthought. Bring or photograph the hardware you want to match, including the interior side, and note whether it is a warm brass, a satin nickel, an oil-rubbed bronze or a matte black. Where an exact match is not made, the locksmith suggests the closest family.

Related services

Lock Replacement & Upgrade near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7