Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Brass pull handle on a long rectangular plate with a keyhole, mounted on a black paneled door beside a white frame.
Small dark safe with a combination dial on a wooden desk beside a closed laptop and books. — Safe Opening & Combination Change, Strathroy-Caradoc

High security · Strathroy-Caradoc

High Security Locks

A colleague showed you a video of a lock being opened with a bump key in a few seconds.

Call (226) 777-9553

In plain words

Most break-ins do not involve picking; they involve a boot, a pry bar or a key that should never have been copied. High security hardware answers all three. A deadbolt with a full one-inch throw and a hardened core resists sawing and kicking, a reinforced strike with three-inch screws keeps the jamb whole, and a patented keyway means a copy can only be made through the locksmith who holds your system. The pick, bump and drill resistance of the cylinder is the layer on top. The locksmith's job is to fit those layers to your particular door and your particular worries.

Sound familiar?

The pharmacy stockroom, the server closet or the cash office is protected by the same ordinary cylinder as the staff washroom. One lost key on a lanyard would open all of them.

How the visit goes

High Security Locks

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench.
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel.
  1. Who holds keys and who should

    For a business or a rental, the locksmith asks to see the key list, or helps you start one. Which keys exist, who carries them, which doors they open, and what happens when someone leaves. This is where the case for a patented or restricted key system becomes clear, because the system replaces guesswork with a register: every key numbered, every order authorised by a named person, and no blanks available outside the locksmith who manages it. The locksmith also asks how many people need to reach each area so the keying plan reflects the way the building actually runs.

  2. Setting up controlled keys

    The key system is registered to you before the first key is cut. The locksmith records the system, the authorised signatories and the number of keys issued, and hands you the authorisation card or online validation details. Every key is cut from code rather than copied, because the angled cuts or side milling must be exact for the sidebar to release. Extra keys later are ordered by an authorised person and logged, and blanks are not sold outside the manufacturer's network. This is what makes a key stop being a thing anyone can duplicate at a kiosk.

  3. Ordering keys the right way

    Extra keys are now a small procedure rather than an errand. An authorised person contacts the locksmith, the request is checked against the system record, and the key is cut from code so it works as cleanly as the first. New keys are numbered and added to the register. Businesses often issue keys against a signature and collect them when someone leaves, which the register makes simple. Homeowners typically keep two or three spare keys and hold onto the authorisation card. A key cut from a worn copy would not release the sidebar properly, which is one more reason the code route is the only route.

High Security Locks

In the van

  • Commercial mortise lock body

  • Pinning kit and plug follower

  • Key control authorisation card

  • Graded deadbolt with hardened bolt

  • Code key cutting machine

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV.

High Security Locks

What affects the quote

  1. Condition of the door itself

    A solid door that hangs true takes hardware straight away. A dropped, swollen or hollow door may need hinge work, shimming or a recommendation to replace the slab before the lock is worth fitting.

  2. Cylinder only or full deadbolt

    Swapping the cylinder inside a sound deadbolt is a smaller job than fitting a new graded deadbolt through the door, and a knob-only door that needs a fresh bore is bigger again.

  3. Number of doors

    Each door gets its own cylinder or lock, strike work and testing. Several doors on one keyway share the setup cost of the key system but add hardware and time per opening.

What to have ready

  • What does the door protect, and what prompted you to think about upgrading now?
  • For a business, who should be allowed to authorise new keys?
  • Is the door wood, steel-clad, fibreglass or aluminium with glass?
Call (226) 777-9553

High Security Locks: questions

Questions
What about the glass panel next to my front door?

A sidelight within reach of the inside thumb-turn is the weak point of an otherwise strong door, since a broken pane lets a hand reach the turn. Options include moving the deadbolt further from the glass, a lock function that needs a key inside as well, or a laminated pane. Because everyone must still be able to leave easily, the locksmith talks through the trade-offs and helps you pick the arrangement that suits your household.

Why does the locksmith care so much about the strike plate?

Because that is where a kicked door fails. The bolt is strong, but it sits in a pocket in the jamb held by a thin plate and short screws, and a boot splits the wood around it. A reinforced strike or box strike fastened with three-inch screws into the wall framing spreads the blow along the frame. It is the least visible part of the upgrade and often the one that does the most.

What actually makes a lock high security?

Three things working together. The cylinder has a second locking mechanism, usually a sidebar released by finger pins or rotating pins, plus hardened steel in the path of a drill, so picking, bumping and drilling take far longer than on an ordinary lock. The deadbolt and strike are heavier and fastened into the framing. And the key is cut on a patented or restricted blank that only an authorised person can have copied. Remove any one and the door is weaker than the label suggests.

Related services

High Security Locks near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7