Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Appin
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Appin

Change or rekey · Appin

Lock Replacement & Upgrade in Appin

Three teenagers, a dog walker, a cleaner and one house key that keeps going missing.

Call (226) 777-9553

In plain words

Sometimes the reason is simply that the hardware looks wrong or has weathered badly. Road salt, freeze-thaw and humid summers are hard on finishes, and a brass handleset can go blotchy while a lacquered knob peels. The locksmith helps you pick a finish that suits the exposure, whether matte black, satin nickel or a PVD brass that resists tarnish, and matches the deadbolt, handleset and interior levers so the entrance reads as one design. Function and grade are chosen alongside looks, so a door refreshed for appearance also comes out better protected.

Sound familiar?

Every morning the front door key needs the same little dance: push in, lift, wiggle, turn. It has been getting worse for a year, and this week it took three tries in the cold before the deadbolt finally gave.

How the visit goes

Lock Replacement & Upgrade

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench. — Appin
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel. — Appin
  1. Who is asking for the change

    The first check is about the person, not the door. An owner can change any lock on their home. A tenant who wants new hardware on the unit door needs the landlord's agreement, and a landlord who changes a lock while a tenant lives there hands over new keys. The locksmith asks which situation applies and, where paperwork helps, looks at identification, a deed, a lease or a property-management note. It takes a minute and it means the new lock goes on with everyone who has a stake in the door knowing about it, which is exactly how a lock should start its working life.

  2. Keying the new locks to one key

    New cylinders arrive on random keys, so the locksmith pins them alike on site when you want one key for the house. Each cylinder is removed, the plug slid out on a follower so the springs stay put, and the bottom pins replaced to match a single new key. Existing cylinders that are staying are repinned the same way. Every key is then cut from the new combination, tried in every lock it should open, and any that drag are recut rather than handed over. The result is one key for the front, back and garage doors, and a clear count of how many exist.

  3. Simple habits that keep new hardware new

    New locks ask very little. Once or twice a year, or at whatever interval the lock maker specifies, a puff of the lubricant that maker calls for in the keyway and a few turns of the key keep the pins moving freely, since the wrong product for that cylinder gathers grit instead of helping it. In winter, wipe salt spray off the exterior hardware when it appears, since salt is the finish's main enemy here. Each spring and fall, check that the hinge and strike screws are snug, because wood doors move with humidity and a dropped door makes a good lock feel worn. A key that starts to need coaxing is an early word from the cylinder.

Lock Replacement & Upgrade

In the van

  • Cylinders, plug follower and pinning kit

  • 75 millimetre strike and hinge screws

  • Boring jig and hole saws

  • Key blanks and key cutter

  • Reinforced strike plate and strike box

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV. — Appin

Lock Replacement & Upgrade

What affects the quote

  1. Smart lock setup

    Fitting a keypad or smart deadbolt includes programming codes, pairing to a phone or hub and calibrating the bolt, which is time on top of the mechanical installation and is named in the quote.

  2. Finish and style

    Standard satin nickel or brass is one line; specialty finishes, matched suites across several doors and designer handlesets are others. The finish you choose for exposure and looks is priced as the maker prices it.

  3. Door material and thickness

    Wood, steel and fibreglass doors are drilled and fitted differently, and a door thicker than the standard 45 millimetres needs extension parts, so the door itself shapes part of the quote.

What to have ready

  • Is the door wood, steel or fibreglass, and roughly how thick is it?
  • Do you own the home, or rent it with the landlord's agreement to change locks?
  • Which finish should the new hardware match?
Call (226) 777-9553

Lock Replacement & Upgrade: questions

Questions
Can the same visit replace locks on more than one door, or does each door need its own appointment?

One visit usually covers every door on the job. The locksmith brings a range of cylinders and strikes, measures each door's backset and bore, and works through the list in order, front entrance first if a key change matters most there. Having a rough list ready, which doors, and whether they should end up on one key or several, lets the locksmith plan hardware before arriving rather than working it out door by door on site.

Is it possible to upgrade just the exterior locks now and handle interior doors later?

Yes, and it is a common way to spread the work out. Exterior doors carry the security load, so starting there with a graded deadbolt and a reinforced strike covers the part that matters most first. Interior locks, passage sets, privacy locks on bathrooms and bedrooms, can be scheduled for a later visit without affecting anything already done, and the locksmith can note what was fitted so the second visit matches it.

Can you match the new lock to my other door hardware?

Yes. Manufacturers make deadbolts, handlesets, knobs and levers in matching finishes and styles, so a replacement deadbolt can sit above your existing handle without looking like an afterthought. Bring or photograph the hardware you want to match, including the interior side, and note whether it is a warm brass, a satin nickel, an oil-rubbed bronze or a matte black. Where an exact match is not made, the locksmith suggests the closest family.

Related services

Lock Replacement & Upgrade near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7