

Car keys · Strathroy-Caradoc
Motorcycle & Scooter Keys in Strathroy-Caradoc
After a winter under a cover, the steering lock will not budge.
In plain words
What is actually possible depends on whether a working key still exists somewhere. If one does, even a spare kept by a family member or a dealership record of the code, a fresh key can usually be cut or duplicated directly from it. If every key for the machine is gone, the locksmith reads the lock itself, translating wafer depths into a cut, or, on a machine with an immobiliser, pairs a new transponder where that system allows it, since some instead need the whole unit replaced. Either route aims for a key that starts the engine and operates the other locks the owner wants included.
How the visit goesAfter a winter under a cover, the steering lock will not budge. The key seats fully in the barrel, but turning it meets a wall of resistance that no amount of wiggling moves past.
Motorcycle & Scooter Keys
How the visit goes


Where the current key situation stands
The next question is about the key itself rather than the lock. A key lost somewhere away from the machine is a different situation from one still at home but broken, and a key that has simply worn thin over years of use is different again from a copy that never cut cleanly in the first place. Each answer changes the approach: a broken or worn key can often be read directly, a lost key means working from the lock alone, and a poor duplicate is more reliably replaced from a proper code than copied again.
Replacing a worn ignition switch or steering lock
Occasionally the lock itself, not just the key, is past a clean repair: wafers worn oval, springs that have lost their tension, or a housing cracked by a previous forced entry. In these cases the locksmith fits a replacement ignition switch or steering lock rather than continuing to chase a fit that will not hold, matching the new unit's mounting and wiring to the original as closely as the machine allows. A new key is cut for the replacement lock, and where other locks on the machine are being kept on the same key, they are rekeyed to match the new combination.
The old key is no longer a concern
Where locks were rekeyed rather than simply cut around, whoever holds an old key is left with a blade that fits the keyway but normally will not turn the plug once it is rekeyed. That is worth mentioning to anyone who previously had access to the machine, such as a former co-owner or a shop that kept a copy on file, since the new combination makes their old key no more useful than a spare piece of metal. Keeping the new keys distinct in a bag or on a labelled ring avoids mixing them up with anything cut before the visit.
Motorcycle & Scooter Keys
In the van
Torx and security bits
Code-cutting machine
Contact cleaner
Replacement transponder chips
Penetrating fluid

Motorcycle & Scooter Keys
What affects the quote
Whether the lock needs replacing
Where wafers, springs or the housing itself are worn or damaged beyond a clean repair, replacing the lock rather than continuing to chase a fit is the more practical route, and is quoted as its own item.
Condition of the steering lock
A steering lock that turns freely adds little to the visit. One that has seized from weather or disuse needs patient freeing before any key can be tested against it, which takes extra time.
Whether an immobiliser is fitted
A machine with an immobiliser needs its electronics paired as well as its lock cut, which adds equipment and testing beyond a purely mechanical key, and is reflected as its own step in the quote.
What to have ready
- Which locks need to be included: ignition, seat, fuel cap, storage?
- Is the steering lock turning freely, or does it feel stuck?
- Is the machine's VIN accessible on the frame or paperwork?
Motorcycle & Scooter Keys: questions
QuestionsCan a locksmith program a new immobiliser or transponder key?
On many machines that carry one. The mechanical cut and the electronic pairing are handled as two separate steps: the key is shaped to fit the lock, then its chip is taught to the vehicle's module using an existing key or programming equipment built for that system, where the maker's own security rules allow it. Both steps are tested with a full engine start, since a key can turn the switch and still fail to start the machine if the chip was never paired.
Could a key from one motorcycle ever accidentally open a different one?
It is uncommon but not impossible, since wafer locks have a limited number of combinations and manufacturers reuse keyway profiles across models. This is one reason manufacturers space their depth increments further apart than the lock's tolerances strictly require, to cut down on accidental matches. It is also why a locksmith reads the specific lock in front of them rather than assuming a key that looks similar will behave the same way.
I only have the key, not the bike here. Can you still cut one from it?
Yes, a key on its own can usually be read and duplicated without the machine present, since the cuts on the blade carry the information the locksmith needs. What cannot be confirmed without the bike is whether an immobiliser is fitted or whether other locks are keyed the same way, so bringing the machine, or at least a photo of the ignition and dash, helps decide whether anything beyond a straightforward copy is needed.
Related services

- Car Key ReplacementThe engine cranks, catches for a second and dies, and a small key-shaped light keeps blinking on the dash.
- Spare Car Key DuplicationA lockout last month ended with a locksmith opening the door and going home, and the same single key has been carried ever since with nothing behind it.
- Key Fob ProgrammingA cracked case or a spin through the wash left the fob unresponsive, and opening it up reveals a slightly corroded board where the buttons used to sit.