Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Strathroy-Caradoc
Technician using a screwdriver on the deadbolt of an open blue-gray front door, with a tool bag and screw tray nearby. — Deadbolt Installation, Strathroy-Caradoc

Change or rekey · Strathroy-Caradoc

Lock Rekeying in Strathroy-Caradoc

The builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build.

Call (226) 777-9553

In plain words

One key for the whole house is a common request and usually achievable. Cylinders that share the same keyway, the shaped channel the key slides into, can all be pinned to the same new combination, so the front door, back door and garage entry answer to a single key. Where a door carries a lock from a different family with its own keyway, that cylinder is swapped for a matching one rather than repinned, and then it joins the group. The locksmith checks each lock face before the work begins so you know exactly which doors will share the key.

Sound familiar?

Your basement tenant has given notice, and a new one arrives on the first. The lock on the separate entrance works perfectly well. You simply want a fresh key for the incoming tenant and for the old one to be retired.

How the visit goes

Inside the lock

What a rekey changes

A deadbolt: the round exterior cylinder with its keyway, the latch and the bolt
  1. A deadbolt seen from the outside: the cylinder, the latch and the bolt

    01

    The lock you already have

  2. The same deadbolt with the housing cut away to show the cylinder and its plug

    02

    Inside the cylinder

  3. Cutaway of the cylinder: springs and top pins above the shear line, bottom pins in the plug

    03

    Pins, springs and the shear line

  4. A new key in the cutaway cylinder, with every pin meeting at the shear line

    04

    A new key, new pins

Lock Rekeying

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench. — Strathroy-Caradoc
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel. — Strathroy-Caradoc
  1. The condition of every cylinder

    A cylinder about to be pinned to a new key should be worth pinning. The locksmith turns the existing key in each lock and feels for a plug that drags, soft springs, a wobbling cam or a keyway packed with grit and old oil. A cylinder in good order is rekeyed as it is. A worn one is cleaned and given fresh springs while it is apart, and one that has truly worn out is pointed out so you can choose a replacement rather than have new pins dropped into a tired lock. A bolt that binds against its strike gets noticed here too, so the strike can be adjusted while the locksmith is at the door.

  2. Proving the old keys are finished

    The last operation at every door is the test that matters most. The locksmith turns the new key from outside and inside with the door open, then closed, and confirms the bolt throws fully and draws back cleanly. Then the old key is tried in the same cylinder and must turn nothing. This is repeated at every rekeyed door, because the door that gets skipped is the one an old key still opens. Spares cut from the new pinning are tried in every lock they are meant for. The old keys, now just shaped brass, are collected or handed back to you for the recycling bin.

  3. Knowing when to rekey again

    Rekeying is not a once-in-a-lifetime event; it is a habit tied to changes in who holds keys. The moments to think about it are the same ones that brought you here: a move, a tenant or roommate change, a key lost with anything identifying the address, a contractor who has finished, or a relationship that has ended. Between those events there is nothing to schedule. Because the house is now on a known system with a record, a later rekey is a shorter visit, and any new lock you add along the way can be pinned to the existing key so the household never drifts back to a ring full of mismatched keys.

Lock Rekeying

In the van

  • Pinning tweezers and tray

  • Key blanks

  • Retaining clip tool

  • Dry graphite or PTFE lubricant

  • Reset tool for user-rekeyable cylinders

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV. — Strathroy-Caradoc

Lock Rekeying

What affects the quote

  1. Mailboxes, padlocks and cabinets

    Small cam locks on mailboxes and cabinets are usually replaced rather than repinned, and padlocks vary in whether they can join the house key; each of these is priced as its own item.

  2. Records, tags and labelled key sets

    A homeowner needs a short note. A property manager may want a keying chart, tagged sets for each suite and a key-issuance log, which is more office work and is quoted as such.

  3. Type of lock on each door

    A standard deadbolt, a knob or lever set, a mortise lock in an older door, a padlock and a smart lock's override cylinder each come apart differently and take different time on the bench.

What to have ready

  • Do any locks feel stiff, loose or need a wiggle to turn?
  • Would you like every door on one key, or should some doors stay separate?
  • Which doors do you want rekeyed, and have you counted the door from the garage?
Call (226) 777-9553

Lock Rekeying: questions

Questions
Should I rekey when I move into a new home?

It is the single most common reason to rekey, and a sensible one. A resale home has typically passed through owners, agents, inspectors, cleaners and trades, any of whom may have had a key cut. A newly built home has been opened by construction crews using a builder's key. Rekeying on move-in means the only working keys are yours, and the same visit can bring every exterior door onto a single key, retiring the assorted keys you inherited.

Will I need to prove I own or rent the home?

Yes, and it is a welcome part of the job. Rekeying decides who can enter, so the locksmith confirms the person asking has the standing to make that decision. For an owner that means photo identification alongside a document that links them to the property, for instance a property tax notice or the closing statement. A manager brings the owner's written authorization. A tenant mentions that the landlord has agreed and will be given a key, since tenancy rules here expect both to hold one.

How is rekeying different from replacing the lock?

Rekeying keeps your existing deadbolt or handle set and gives it a new key, commonly by changing the pins inside, though some cylinders reset a different way. Replacing removes the whole lock or cylinder and fits new hardware. Rekeying suits locks that are in good condition and simply need a fresh key. Replacement is the better call for hardware that is worn or damaged, built to a low grade, on a keyway the other doors cannot share, or due for a change of style or a keypad.

Related services

Lock Rekeying near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7