Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Newbury
Technician using a screwdriver on the deadbolt of an open blue-gray front door, with a tool bag and screw tray nearby. — Deadbolt Installation, Newbury

Change or rekey · Newbury

Lock Rekeying in Newbury

The builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build.

Call (226) 777-9553

In plain words

One key for the whole house is a common request and usually achievable. Cylinders that share the same keyway, the shaped channel the key slides into, can all be pinned to the same new combination, so the front door, back door and garage entry answer to a single key. Where a door carries a lock from a different family with its own keyway, that cylinder is swapped for a matching one rather than repinned, and then it joins the group. The locksmith checks each lock face before the work begins so you know exactly which doors will share the key.

Sound familiar?

One key for the front door, another for the back, a third for the side door into the garage, and a fourth for the shed. You stand on the step every evening flipping through them in the dark, trying each one until something turns.

How the visit goes

Inside the lock

What a rekey changes

A deadbolt: the round exterior cylinder with its keyway, the latch and the bolt
  1. A deadbolt seen from the outside: the cylinder, the latch and the bolt

    01

    The lock you already have

  2. The same deadbolt with the housing cut away to show the cylinder and its plug

    02

    Inside the cylinder

  3. Cutaway of the cylinder: springs and top pins above the shear line, bottom pins in the plug

    03

    Pins, springs and the shear line

  4. A new key in the cutaway cylinder, with every pin meeting at the shear line

    04

    A new key, new pins

Lock Rekeying

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench. — Newbury
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel. — Newbury
  1. Doors that belong to someone else

    A few openings around a home are not the occupant's to change, and sorting them out early avoids awkwardness later. In a condominium, the lobby, the garage, the locker room and the mailroom are the corporation's doors, and the suite door itself may need to remain on a system the building can access in an emergency. In a rental, the landlord has a say and must be given a key. A shared side entrance in a semi-detached or a duplex serves two households. The locksmith asks about each of these, confirms who needs to agree, and keeps them separate from the doors that are plainly yours.

  2. Resetting a user-rekeyable cylinder properly

    Some residential deadbolts and handle sets are built so the owner can change the key with a small tool, a working key and the new key. They save a bench session, and they also go wrong in a particular way: without a working key of the correct type, or with a key from the wrong keyway, the reset stalls partway. The locksmith carries the reset tool and the reset procedure for these cylinders, confirms the keyway matches the new house key, and completes the change so the cylinder accepts the new key and rejects the old one. If the mechanism has been damaged by a forced reset, it is replaced with a standard cylinder and pinned to match.

  3. The old keys are just metal now

    Whatever was out in the world before today, the copy the contractor kept, the key the former roommate never returned, the ring that went missing on the bus, none of it turns a lock on your property any more. That is the whole point of the visit, and it is worth saying plainly because people sometimes keep worrying afterwards. If you still hold old keys, they can go in the metal recycling. There is no need to change the door hardware or your routine, but any keypad code known to someone whose access is ending should be deleted or changed separately, since rekeying the mechanical cylinder does not touch those codes.

Lock Rekeying

In the van

  • Pinning tweezers and tray

  • Key blanks

  • Retaining clip tool

  • Dry graphite or PTFE lubricant

  • Reset tool for user-rekeyable cylinders

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV. — Newbury

Lock Rekeying

What affects the quote

  1. Type of lock on each door

    A standard deadbolt, a knob or lever set, a mortise lock in an older door, a padlock and a smart lock's override cylinder each come apart differently and take different time on the bench.

  2. Number of keys cut

    Keys are cut and tested individually, so the total depends on how many the household or the tenants need. Say the number when you book and the quote reflects it from the start.

  3. Mailboxes, padlocks and cabinets

    Small cam locks on mailboxes and cabinets are usually replaced rather than repinned, and padlocks vary in whether they can join the house key; each of these is priced as its own item.

What to have ready

  • Is there a shed, gate, mailbox or padlock you would like on the same key?
  • Do any locks feel stiff, loose or need a wiggle to turn?
  • Is the home a condo or in a building with shared entrance doors?
Call (226) 777-9553

Lock Rekeying: questions

Questions
Should I rekey when I move into a new home?

It is the single most common reason to rekey, and a sensible one. A resale home has typically passed through owners, agents, inspectors, cleaners and trades, any of whom may have had a key cut. A newly built home has been opened by construction crews using a builder's key. Rekeying on move-in means the only working keys are yours, and the same visit can bring every exterior door onto a single key, retiring the assorted keys you inherited.

Will I need to prove I own or rent the home?

Yes, and it is a welcome part of the job. Rekeying decides who can enter, so the locksmith confirms the person asking has the standing to make that decision. For an owner that means photo identification alongside a document that links them to the property, for instance a property tax notice or the closing statement. A manager brings the owner's written authorization. A tenant mentions that the landlord has agreed and will be given a key, since tenancy rules here expect both to hold one.

How is rekeying different from replacing the lock?

Rekeying keeps your existing deadbolt or handle set and gives it a new key, commonly by changing the pins inside, though some cylinders reset a different way. Replacing removes the whole lock or cylinder and fits new hardware. Rekeying suits locks that are in good condition and simply need a fresh key. Replacement is the better call for hardware that is worn or damaged, built to a low grade, on a keyway the other doors cannot share, or due for a change of style or a keypad.

Related services

Lock Rekeying near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7