Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Closed mortise lock case with spindle opening, keyhole, latch and deadbolt on a wooden workbench. — Vintage Mortise Lock Service, Southwest Middlesex
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Southwest Middlesex

Change or rekey · Southwest Middlesex

Vintage Mortise Lock Service in Southwest Middlesex

The key turns freely in the round cylinder on the door, all the way around and back, without the bolt shifting at all.

Call (226) 777-9553

In plain words

Vintage mortise lock service is the repair of the original lock in an older door rather than its removal. The lock is a rectangular steel case that lives inside a pocket in the door edge, and nearly everything that goes wrong with it, a tired spring, dried grease, a worn hub, a lost key, can be put right on the bench. The locksmith confirms you own or occupy the home, takes the case out through the door edge, rebuilds it, sorts out the keys and puts it back in the same pocket. The door keeps its knobs, escutcheons and history, and it locks as it did when new.

Sound familiar?

Someone painted the door years ago without removing the hardware. The faceplate, the strike and the little thumb-turn are all under several coats, the deadbolt scrapes when it moves, and the knob is stiff enough to leave marks on your hand.

How the visit goes

Vintage Mortise Lock Service

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench. — Southwest Middlesex
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel. — Southwest Middlesex
  1. Which keys exist and who has them

    The locksmith asks to see every key that goes with the door: the one that works, the ones that used to, and the bag of loose bit keys that came with the house. A worn original is still the most useful pattern for a new key, and a bent one explains why the lock has become temperamental. For a cylinder lock, a lost or stolen key is a reason to rekey while the case is out, and a key that only a former occupant holds is worth retiring. The count of keys wanted afterwards is settled now too, so the spares are cut while the lock is on the bench rather than on a return visit.

  2. Reassembly and setting the trim

    The case slides home and is screwed off, then the cylinder or keyhole escutcheon goes on, followed by the spindle, knobs and rosettes. The spindle is trimmed to length so the knobs sit against the door without pinching, and the set screws are tightened so there is no free play before the latch moves. The thumb-turn is aligned with the deadbolt tail so it throws with a light touch. Paint is cleared from the faceplate and strike edges where it was catching. Then the door is closed and the whole lock is worked from both faces with the key, the knobs and the turn, several times, listening for the latch to seat.

  3. A lock that feels new and looks old

    What you get back is the door you had, with the lock working as it was designed to. The knob returns level with a snap, the latch catches when the door is pushed shut, the deadbolt throws with a light turn of the key or the thumb-turn, and the key goes in and out without a wiggle. Nothing on the face of the door has changed except that the brass has been cleaned where it was handled. The locksmith runs through each function with you from both sides before leaving, so the standard of what has been done is something you have seen, not something you have been told.

Vintage Mortise Lock Service

In the van

  • Light lock oil

  • Spindle and knob set screws

  • Reproduction mortise case

  • Deadbolt lever springs

  • Hardwood dowel and wood glue

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV. — Southwest Middlesex

Vintage Mortise Lock Service

What affects the quote

  1. Bit key or cylinder lock

    A bit-key case has keys filed by hand on the bench, while a cylinder lock is rekeyed or fitted with a new cylinder on a key machine. The two take different time and materials, and the quote follows.

  2. Keying doors alike

    Bringing several interior locks onto one bit key, or several cylinders onto one flat key, is extra bench work per lock and is simplest to arrange while all the cases are out on the same visit.

  3. How many keys you want

    Bit keys are made individually by hand and cylinder keys are cut per copy, so the count you ask for is a line of its own. Decide who in the household needs one before the visit.

What to have ready

  • Is the deadbolt keyed from the inside as well as the outside?
  • Roughly when was the house built, and is the door original to it?
  • How many doors need attention, and are any of them interior doors?
Call (226) 777-9553

Vintage Mortise Lock Service: questions

Questions
Can the work be done with the lock left in the door?

Rarely, and it is not the better route. Almost everything that fails is inside the case, and the case only opens once it is out of the pocket, which takes a few minutes and leaves no mark. Working through the keyhole with an unapproved or over-applied spray tends to wash out what little lubricant should stay and gums the levers later. Removing the case, cleaning it properly and refitting it is the repair that lasts.

How should I look after the lock once it is serviced?

A drop of the right lock oil into the latch and bolt once a year is plenty. If the lock has a pin-tumbler cylinder, use whatever lubricant that cylinder's maker specifies, since some take a dry graphite or PTFE product and others a specified liquid one. Try the latch and deadbolt each spring and fall; if the bolt starts to scrape, the strike wants a small adjustment before anything is strained. Keep bit keys out of a pocket where they bend.

Can my interior doors be serviced too, and can one key work all of them?

Usually yes to the first, and to the second once the locksmith checks the locks. Interior mortise latches with privacy turn buttons are lighter versions of the entry lock and respond to the same clean and re-spring. Interior locks in a house were sometimes supplied to one bit key, and where the key sections, warding and levers actually match, the locksmith can restore that arrangement so a single key opens several bedroom and bathroom doors. It is a practical thing to have when a child locks a bathroom from inside.

Related services

Vintage Mortise Lock Service near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7