Skip to content
AppinLocksmith Services
Open 24/7(226) 777-9553Open 24/7
Two people exchanging a key at an open front door, with a disassembled lock cylinder and small parts arranged on a cloth nearby. — Lost Keys — Same-Visit Rekey, Southwest Middlesex
Person in a dark cap handing a brass key to a smiling person in the open doorway of a pale green door. — Home Lockout Service, Southwest Middlesex

Lockouts · Southwest Middlesex

Lost Keys — Same-Visit Rekey in Southwest Middlesex

You were shovelling the driveway after dark and the ring must have slid out of your coat pocket somewhere under a metre of snow.

Call (226) 777-9553

In plain words

A missing key is also the moment a household can stop carrying four. Because a rekey sets a fresh combination in every cylinder anyway, the locksmith can set the same combination in all of them, provided they share a keyway family, so the front door, back door, garage entry and side gate open with one key. Where a cylinder belongs to a different family, it can be swapped for one that matches during the same visit. The result is a single key on each ring, fewer copies to keep track of, and the certainty that the lost one operates none of them.

Sound familiar?

Your purse was taken from the back of a chair at a restaurant. The cards can be cancelled by phone tonight, but the house keys were in the side pocket beside a driver's licence that shows exactly where those keys fit.

How the visit goes

Lost Keys — Same-Visit Rekey

How the visit goes

Technician in a cap holding a car key fob beside an open vehicle, with a tablet and key parts on a bench. — Southwest Middlesex
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel. — Southwest Middlesex
  1. Where the tenant and landlord line falls

    Rented and shared buildings add a boundary that the locksmith maps early. A tenant's suite door is theirs to use but a lock change is agreed with the landlord, who receives keys as well. A condominium suite cylinder may sit on the building's master system, so its rekey is planned so the master still works, and the lobby, garage and amenity doors stay with the corporation. A small business rekeying a shop door checks what the lease says about the landlord holding a key. Sorting this out on the doorstep keeps every party informed and lets the work proceed with no surprise phone calls the following week.

  2. Bringing every door onto one key

    When the household wants a single key, the locksmith pins each compatible cylinder to the same combination in turn, using the same cut key as the reference so nothing drifts between doors. A cylinder from a different keyway family is exchanged for one that matches, or the household keeps a second key for that door if they prefer. Where a home has a keyed garage entry, a shed and a gate on the same list, they follow the same process. The finished set is tried door by door with a single key, and the spare cylinders and old keys are gathered up so nothing that fits the old combination stays in circulation.

  3. Cylinders that turn more sweetly than before

    A cylinder that has been apart, cleaned and repinned usually feels better than it did before the key went missing. Old grease, road salt and the grit that collects in a keyway over a decade came out with the plug, and a dry lubricant went in. Keys cut to code seat fully and lift each pin cleanly. If a door had a key that needed a wiggle or a shove, that is often gone. Follow your lock's own maintenance guidance to keep it that way: many cylinders take a puff of graphite or PTFE into the keyway now and then, some a specified liquid lubricant instead; general household oils and sprays collect dust and gum the pins.

Lost Keys — Same-Visit Rekey

In the van

  • Dry graphite or PTFE lubricant

  • Top pins and cylinder springs

  • Rekeyable-cylinder reset tool

  • Cylinder retaining-clip and cap tools

  • Key blanks in common keyways

Technician holding a key fob over a metal workbench with a rugged tablet and loose fobs, beside a gray SUV. — Southwest Middlesex

Lost Keys — Same-Visit Rekey

What affects the quote

  1. The kind of lock each cylinder lives in

    Knob, lever, deadbolt, mortise and rim cylinders come out of the door differently and take different care to refit. A mortise cylinder in a century home is more involved than a builder-grade knob.

  2. Travel to the property

    Every call-out includes the drive. A house across town and a rural property at the end of a concession road involve different time on the road, and the quote reflects the trip.

  3. Getting to each cylinder

    Doors spread across a large lot, a suite up several flights behind a locked lobby, or a gated property with a padlock at the road add walking and waiting time that the quote allows for.

What to have ready

  • Is the property a condo or apartment with shared entrance doors?
  • Have any of the locks been stiff, sticky or hard to turn lately?
  • Was a garage remote, building fob or car key on the same ring?
Call (226) 777-9553

Lost Keys — Same-Visit Rekey: questions

Questions
I live in a condominium. Which locks are mine to rekey?

Your suite door is generally the one you can act on, and it may sit on a building master system, so the locksmith plans the rekey so the master still operates while the old change key stops working. Lobby doors, the parking gate, amenity rooms and the mailroom belong to the corporation; report a lost fob or key for those to the property manager, who deactivates or reissues it. The locksmith can help sort which is which.

How long does a whole-house rekey take?

Plan on an hour or two for a typical house with three or four cylinders, including the walk-through, identification, pinning, cutting and testing. Each additional cylinder adds a little, as does swapping a cylinder to bring a mismatched door onto the same key, resetting a homeowner-rekeyable lock or clearing a garage opener. The locksmith gives a realistic window on the phone once the list of doors is known.

My lock is the homeowner-rekeyable type but the working key is lost. Can it still be reset?

Yes. Those cylinders let an owner change the key with a small learn tool, but only while a working key is in hand. Without one, a design such as Kwikset SmartKey is removed and placed in its own reset fixture, returning it to a blank state; other cylinder types are rekeyed by their own method instead. A new key is then set and the lock goes back on. It is a few extra minutes rather than a replacement.

Related services

Lost Keys — Same-Visit Rekey near you

Call(226) 777-9553

Request a visit

Or call (226) 777-9553 · open 24/7